首页>产品中心>其它设备
JCJ 挤出机
其它设备
JCJ 挤出机
本机适用于高粘度物料(高粘度腻子、密封胶、胶印油墨、胶粘剂)及流动性差的物料的挤压输送和灌装,可同时与三辊机、灌装机及球磨机配套使用。

本机备有挤出调速装置,可以根据工艺要求选择最佳挤出速度,并配备专用拉缸,同时挤压盘采用自动充气压缩膨胀,与缸壁能保持紧密接触,密封圈采用耐溶剂橡胶,寿命长。挤压结束,拉缸内的物料基本能挤压干净,大大减轻了劳动强度。

本机适用于高粘度物料(高粘度腻子、密封胶、胶印油墨、胶粘剂)及流动性差的物料的挤压输送和灌装,可同时与三辊机、灌装机及球磨机配套使用。

本机备有挤出调速装置,可以根据工艺要求选择最佳挤出速度,并配备专用拉缸,同时挤压盘采用自动充气压缩膨胀,与缸壁能保持紧密接触,密封圈采用耐溶剂橡胶,寿命长。挤压结束,拉缸内的物料基本能挤压干净,大大减轻了劳动强度。


Applicable for high viscosity (Putty, gasket cement, offset ink, adhesive) and those slow flowing material conveying and filling. Also mating with Three roller mill, filling machine and pearl milling machine.

It's equipped with speed regulator and choose best speed by technology requirement. Also mating with bucket. The extruding disc is automatic air inflation to keep close contact with bucket wall. The gasket is made of anti-solution rubber with long life. The material can be cleaned well when finish to save labor strength.


型号 ModelJCJ-900JCJ-1000JCJ-1100JCJ-1200
  功率 Power (kw)3344
  拉缸直径 Bucket diameter (mm)900100011001200
  压盘直径 Diameter of pressure pan (mm)900100011001200
  最大上升行程 Lift (mm)1150115012501400
  安装控制高度 Control height of installation (mm)4000400042004400