首页>产品中心>其它设备
SMJ 吸墨输料机
其它设备
SMJ 吸墨输料机
本机属于立式螺旋输送高粘度流体的理想设备,结构合理、操作方便。料缸低速旋转时,两刮刀将周壁及缸底物料刮下,且螺旋输送器可随物料高度下降而下降,减少物料与输送器接触高度,便于清洗,提高产品质量。适用于胶印油墨、胶粘剂等物料的输送。

本机属于立式螺旋输送高粘度流体的理想设备,结构合理、操作方便。料缸低速旋转时,两刮刀将周壁及缸底物料刮下,且螺旋输送器可随物料高度下降而下降,减少物料与输送器接触高度,便于清洗,提高产品质量。适用于胶印油墨、胶粘剂等物料的输送。


Applicable for high viscosity material with vertical and helix structure, good structure and esay operation. The bade can collect material on the wall and bottom when the tank rotate in low speed. The helix conveying device and move down following material down to reduce gap between material and conveying device for easy cleaning and improve quality. Especially for offset ink and adhesive.


规格 Type单位 UnitSMJ-4
             
  吸料器功率 Suction device powerkw4 BLD-4-2-17
  吸料器转速 Suction device speedr/min85
  料缸部分功率 Tank powerkw2.2 BLD-2.2-3-59
  料缸转速 Tank speedr/min5
  吸料器升降行程 Range of up and downmm1100

  料缸尺寸
  Tank size

  D(直径) Diametermm1000,1500
  H(高度) Heightmm700,900

  外形尺寸
  Overall size

  AxBxH(长x宽x高) Length x Width x Height

mm2700 x 1900 x 2930
  L1(中心距) Center distancemm900
  L2(中心距) Center distancemm1150


上一条:JCJ 挤出机 下一条:没有了